Specifications
Nexo TS2400 (used with Nexo TS TD Controller 2.4)
Frequency Response |
40Hz - 17KHz +/- 3dB |
Usable Frequency Range |
36Hz - 19KHz @ -6dB |
Nominal Sensitivity |
107dB SPL/1W @ 1m |
Peak SPL |
143dB Peak @ 1m |
Dispersion Angles (H x V) |
70 x 35 degrees |
Crossover Frequencies |
300Hz & 1.8KHz |
Connectors |
1 x 8-Pole Speakon |
Height x Width x Depth |
1022 x 791 x 597mm |
Weight |
105 Kg (231 lbs) net |
Components
LF |
2 x 15" 4 Ohm drivers, loaded by Touring System Vented Horn |
MF |
2 x Nexo patented 8 Ohm mid drivers, with heatsink and Touring System Horn |
HF |
1 x Neodymium magnet, 3" Titanium diaphragm, high temperature Ferrofluid cooled driver, Low Distortion Diffraction Throat, Interface Control Waveguide & Constant Directivity Horn |
Nominal Impedance
Bass |
2 x 4 Ohms or 2 Ohms paralleled |
Mid-Top |
4 Ohms |
Recommended Amplifiers
Bass |
2 x 700 to 1200Watts into 4Ohms or 1 x 1400 to 2400 Watts into 2 Ohms |
Mid-Top |
1 x 700 to 1200 Watts into 4 Ohms |
|
The same amplifier type should be used for all Bass & Mid-Top channels |

The innovative load and unusual speaker layout of the LSub reduces distortion and cone displacement, thus, high-efficiency is maintained down to 28Hz.
Nexo LSub 2000 (used with Nexo LS TD Controller)
Frequency Response |
30Hz - 120Hz +/- 3dB |
Usable Frequency Range |
28Hz - 130Hz @ -6dB |
Nominal Sensitivity |
106dB SPL/1W @ 1m |
Peak SPL |
141dB Peak @ 1m |
Crossover Frequencies |
50Hz & 120Hz |
Connectors |
1 x 4-Pole Speakon |
Height x Width x Depth |
1022 x 791 x 597mm |
Weight |
80 Kg (176 lbs) net |
Components
2 x 18" 4 Ohm drivers LSub loaded
Nominal Impedence
2 x 4 Ohms or 2 Ohms paralleled
Recommended Amplifiers
2 x 800 to 1200Watts into 4Ohms or 1 x 1600 to 2400 Watts into 2 Ohms